Week 8: Jetson Bring-Up & Force-Feedback Test Bench
Week of November 2-6
This week focused on bringing up our main computer (an NVIDIA Jetson) and building our first force-feedback test bench, along with getting our hardware and workspace in order.
Force-feedback test bench
We designed and built a single-joint elbow test bench with two motors: a CubeMars AK60-6 as the exoskeleton's elbow, and a larger AK10-9 to simulate how the humanoid's elbow would respond. Each motor runs on its own CAN bus so that one can't slow down the other. Building it involved mechanical design for the motor mounts and electrical bring-up of our power system and e-stop, so a physical e-stop can cut motor power independently of the software.
Jetson and firmware bring-up
We flashed the Jetson with a new version of Ubuntu and set up our development environment on it, including the drivers for our USB-to-CAN adapter. We then wrote our own motor control library for the CubeMars motors and ran our first teleop test on the bench, with the humanoid motor following the exo motor. Finally, we added force feedback: torque on the humanoid motor is scaled down and applied back to the exo motor, with hard safety limits.
We also brought up a first MuJoCo simulation of the humanoid, designed our first elbow prototype, and placed our first component order for filament, fasteners, webbing, and a Teensy microcontroller.
Current status
- Jetson flashed and set up
- Power system and e-stop brought up
- Two-motor elbow test bench built, with the humanoid motor following the exo motor and force feedback working
- First MuJoCo simulation and elbow prototype design in progress
- First component order placed
Personal contributions
| Team member | Personal contribution |
|---|---|
| Vishesh Garg | Flashed and set up the Jetson, wrote the CubeMars motor library and first bench teleop script, and added force feedback to the test bench. |
| Connor Switzer | Led the electrical bring-up of the power system and e-stop, and co-designed the test bench mounts. |
| Celine Ebrahimian | Helped bring up the MuJoCo simulation of the humanoid and helped with test bench bring-up. |
| Callista Tan | Worked on the electrical design and wiring for the test bench. |
| Laila Elhossini | Designed the first elbow prototype and researched webbing for the elbow cuffs. |