Week 3: Idea Exploration Kickoff
Week of September 28-October 2
While this week was dedicated to iterating on problem criteria/constraints in the course schedule, we received the green light to proceed with idea exploration during the project proposal presentation. Thus, this week was spent delegating and beginning to conduct in-depth research on existing designs to start formulating relevant designs for this project.
Design problem finalization
After the presentation last week, we finalized the need, problem statement, objectives, constraints, and criteria for the force-feedback upper-body exoskeleton. Current objectives include a total system mass under 10 kg and exoskeleton/humanoid joints staying within 10 degrees of each other. Key constraints include three-DOF force feedback at the shoulder and wrist and one DOF at the elbow, at least 30 minutes of untethered operation, real-time response within 50 ms, and torque and joint-angle limits for operator safety.
Idea exploration
We identified four potential overarching actuation architectures to compare for this project: a single open kinematic chain with actuators at each joint, a pulley-driven mechanism, a pneumatic-driven mechanism, and a linear-actuator-driven mechanism. We also researched soft pneumatic actuation options for the wrist, elbow, and shoulder from published research papers, and began brainstorming wrist actuation concepts.
Current status
- Design problem finalized: need, objectives, constraints, and criteria documented
- Four potential candidate actuation architectures identified for comparison
- Soft pneumatic options researched per joint from published papers
Personal contributions
| Team member | Personal contribution |
|---|---|
| Vishesh Garg | Researched pneumatic actuation methods for the wrist/elbow/shoulder including soft robotics options. |
| Connor Switzer | Researched linear and pulley-based actuation methods for the wrist, using existing research papers as guidance. |
| Celine Ebrahimian | Documented existing open kinematic chain rotary actuator exoskeletons. |
| Callista Tan | Researched linear actuation methods for the shoulder and elbow joints of an exoskeleton. |
| Laila Elhossini | Researched pulley-based actuation methods for the shoulder and elbow joints of an exoskeleton. |